The Seagate SkyHawk 10TB Surveillance HDD is designed for use in DVR and NVR security camera systems. Here are some key features:
- Storage Capacity: 10TB
- Form Factor: 3.5 Inch
- Interface: SATA III 6 Gb/s
- Cache: 256MB
- RPM: 7200
- Max Sustained Transfer Rate: 255 MB/s
- Workload Rating: Up to 180TB/year, suitable for 24/7 surveillance
- RV Sensors: Helps maintain performance in multi-bay systems.
Seagate SkyHawk AI 10TB 3.5″ Surveillance HDD
The Seagate SkyHawk AI 10TB 3.5″ Surveillance HDD is ideal for NVR (network video recorders) and AI-enabled NVR systems. Its SkyHawk AI drive is designed for 24/7 workloads, or 8760 operational hours per year, and can handle up to 64 HD cameras and 32 additional AI streams, or 16 AI channels. Seagate’s ImagePerfect AI technology contributes to 0% lost frames, while strong dependability is supported by a workload rate of 550TB per year. Moreover, SkyHawk Health Management protects your surveillance storage by concentrating on preventive, intervention, and recovery solutions. If you utilize this disk in a RAID, the included RAID RapidRebuild technology allows for quicker volume rebuilds. Seagate designed this SkyHawk AI drive with a storage capacity of 10TB and a 3.5″ form factor, as well as a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 7200 rpm, all of which contribute to continuous data transfers at a sustained rate of up to 245 MB/s. 300,000 load/unload cycles, a 2 million hour MTBF, 1 per 1015 non-recoverable read errors per bit read, and an AFR (annualized failure rate) of 0.44% further improve data dependability.
ImagePerfect AI Firmware
The Seagate SkyHawk AI 10TB 3.5″ Surveillance HDD improves picture integrity while also providing extra AI workload support in AI-enabled surveillance systems that are always on.
Designed to Support an Additional 32 AI Streams
This Seagate SkyHawk AI 10TB 3.5″ Surveillance HDD will enable an extra 32 AI streams while capturing footage from up to 64 HD cameras at the same time.
Built to Handle Heavy Surveillance Workloads
This SkyHawk AI drive has an endurance rating of 550TB per year and can endure more workloads than ordinary surveillance drives. It was designed and constructed to manage severe surveillance workloads in traditional video recording and advanced video analytic systems.
Advanced Vibration Management
This Seagate SkyHawk AI 10TB 3.5″ Surveillance HDD with Advanced Vibration Management enhances and sustains performance in NVR systems with 16 or more bays.
SkyHawk Health Management
SkyHawk Health Management aggressively safeguards your surveillance storage by emphasizing preventive, intervention, and recovery alternatives. RAID RapidRebuild is included, which speeds up volume rebuilds. For further information, please contact your Seagate sales representative.
